manualshive.com logo in svg

Norstar StarTalk Mini, Installation Manual, Page: 111 / 372

Share
Download
Norstar StarTalk Mini Installation Manual Download Page 111

Glossary   

Glossary

 

 

 

 

 

   

 

   

   

Administration

The tasks involved in maintaining the 

 mailboxes, greetings and set up

configuration.

Alternate greeting

A greeting that is recorded for a Personal Mailbox and played on exceptional
occasions such as absence, illness, or vacation.

Analog Terminal Adapter

A 

 product that allows for the connection of an analog device, such as a

single-line telephone or a facsimile machine, to a 

 KSU.

Attendant sign ON/OFF

The task that is performed by a company receptionist or designated operator

that indicates to 

 when an operator is available to answer calls.

Automated Attendant

The 

 answering service that answers incoming calls with a Company

Greeting, plays a list of 

 options to a caller, and performs call routing

functions in response to a caller’s 

 selections.

Broadcast Message

A message that can only be sent by the System Coordinator. This type of
message is played in all initialized Personal Mailboxes and plays immediately
when the mailbox is opened by the owner. It is automatically deleted after the
mailbox owner listens to the message.

Business Status

A 

 setting that tells 

 whether a company is opened or closed for

business.

Class of Service

A predetermined number designation that specifies the 

 options for a

mailbox.

 Mini Reference Guide

Summary of Contents for StarTalk Mini





















































































































































































































































































































































































Reviews:

No comments