manualshive.com logo in svg

Norstar StarTalk Mini, Installation Manual, Page: 61 / 372

Share
Download
Norstar StarTalk Mini Installation Manual Download Page 61

Section 3: information Mailboxes

   

Recording

the

information

Mailbox

Greeting

The 

 Mailbox Greeting can be recorded or changed whenever you

need to update the recording.

To record your Information Mailbox Greeting:

1.

P r e s s  

 

 

 

The display shows:

2.

Press 

The display shows:

3.

Enter

<the information Mailbox number and password>

Note:  For your Information Mailbox number and password combination,
see your System Coordinator.

4 .

Press 

 or 

The display shows:

5 .

Press 

At the tone, record the prirnary Information Mailbox Greeting.
Note:  For information about Pause and Continue while recording a
greeting refer to  Section 5, Leaving a message from a 
telephone.

 

 Reference Guide

Summary of Contents for StarTalk Mini





















































































































































































































































































































































































Reviews:

No comments