NEC Univerge UM8000 User Manual Download Page 139

Page: 139 / 469

Subscriber Template Overview

139

Configuring Default Greetings

The Subscriber Template Greetings page specifies how the messaging system handles calls when an extension is busy.

To activate the busy greeting and configure after greeting actions

In the Navigation Pane, click

Subscribers > Subscriber Template

Greetings

For detailed field information, see the

Subscribers > Subscriber Template > Greetings

table.

Select

Enable busy greeting

to play a busy greeting when the subscriber’s extension is busy.

If the subscriber does not have a busy greeting recorded callers hear “<

Subscriber’s name

> is on the phone.”

In the After greeting section, select one of the following:

•

Take a message.

Records a message for the owner of the messaging system mailbox.

•

Take a message for group.

Records a message for the specified group.

•

Type the name of the group to receive the messages, or click

Search

to find and make a selection. The

name of the group may not exceed ten characters.

•

Route to operator.

Routes the caller to the system operator box.

•

Route to.

Routes the call to a specified system ID. Type an ID, or click

Search

to find and make a selection.

•

Hang up.

Disconnects without saying good-bye.

•

Say bye.

Plays a prompt asking if the caller needs further assistance, pauses to wait for the caller to make a

selection, if there is no response, says good-bye and disconnects.

•

Restart.

Returns the caller to the opening greeting box.

Click

Save

Understanding Default Profile Settings — Overview

Subscriber Template Overview

Summary of Contents for Univerge UM8000






















































































































































































































































































































































































































































































Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands

NEC Univerge UM8000, User Manual

Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands