NEC Univerge UM8000 User Manual Download Page 318

Page: 318 / 469

Troubleshooting

318

Disk Full Error Messages

Use the following procedure to reclaim disk space on the messaging system server if you receive disk full warning
messages.

To reclaim disk space on the messaging system server

Check the contents of the public interview box. Confirm that at least one subscriber has

Allow access to public

messages

selected on their Access Options page.

Confirm that the subscribers who have access to

public messages

are routinely reviewing and taking action on the

messages in the box.

Check in System > Configuration > Public Messages that the

Keep old messages for

and

Keep archived

messages for

fields are set correctly.

The default values are 0 (zero) hold days and two archive days. Higher values for hold and archive days might
require additional disk space.

Check the

Keep old messages for

and

Keep archived messages for

fields for the Subscriber Template and for

individual subscriber’s Profile page.

The default values are 0 (zero) hold days and 14 archive days. Higher values for hold and archive days might
require additional disk space.

Check the

Startup Options

field on the System > System Settings page. Remove the

parameter.

Generate a subscriber report. See “

Creating Directory Reports

.”

NOTE

THE

YSTEM

> L

OGS

PAGE

GENERATE

SYSTEM

LOGS

FOR

MESSAGING

SYSTEM

SOFTWARE

ACTIVITY

. R

EFER

Configuring

Log Settings

•

Look for subscribers whose

Last contacted

field is “never.” Delete messages for these subscribers.

NOTE

ELETE

ESSAGES

BUTTONS

ARE

NOT

ACTIVE

THE

MESSAGING

SYSTEM

SOFTWARE

NOT

RUNNING

•

Look for subscriber accounts that do not match actual subscribers and delete them.

Check the disk space:

Open a terminal session with puTTy and attach to the messaging system server.

At the command prompt, type

then press ENTER.

•

The amount of free space is displayed.

If there is little or no available disk space, type

h max

depth=1 /opt/vmail

then press

ENTER

to see

the file sizes for each directory:

Check the System > Restore page and remove some of the older back up files from the table.

If none of these steps resolves the problem, contact your technician or Technical Support.

Related Topics

Call Report Log Reports

Message Networking Configuration

Troubleshooting

Space is taken up by:

This indicates:

/opt/vmail/var/personal

Too many messages are being retained.

/opt/vmail/var/log

Too many log files might be retained.

/opt/vmail/var/fax

Too many faxes have been saved.

Summary of Contents for Univerge UM8000






















































































































































































































































































































































































































































































Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands

NEC Univerge UM8000, User Manual

Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands