NEC Univerge UM8000 User Manual Download Page 389

Page: 389 / 469

Page Field Descriptions

389

Call Management > Transaction Boxes

Messages

Field

Description

Allow callers to change
messages they just
recorded

Select to let callers change messages they have just
recorded. Clear to prevent message changes.

Allow callers to leave
urgent messages

Select to ask unidentified callers if they want to mark a
message as urgent. Clear to prevent unidentified callers from
marking messages as urgent.

Mark all messages urgent.

Select to mark all messages

from unidentified callers as urgent.

Maximum message
length to record from an
unidentified caller…
seconds

Specify the maximum length, in seconds, of a message from
an unidentified caller. This setting applies only if the selected
action is

Take a message

After taking a message

Specify what the system does after recording a message
from a caller. This setting applies only if the

Take a

message

action was selected on the Greetings page for this

transaction box. Select one of the following:

•

Route to.

Routes the caller to another

system ID

. If

selected, type the system ID or click

Search

and select a

system ID.

•

Route to operator.

Routes the caller to the system

operator box.

•

Hang up.

Disconnects without saying good

bye.

•

Say bye.

Plays a prompt asking if the caller needs

further assistance, pauses to wait for the caller to make a
selection, if there is no response, says good-bye and
disconnects.

•

Restart.

Returns the caller to the opening greeting box.

Summary of Contents for Univerge UM8000






















































































































































































































































































































































































































































































Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands

NEC Univerge UM8000, User Manual

Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands