NEC Univerge UM8000, User Manual

Page: 431 / 469

Page Field Descriptions 431
System > Configuration > Recordings
Field Description
Maximum message life…
days
Type the number of days the system keeps new unheard
messages before automatically deleting them.
Maximum recording
time for a
person
-
to
-
person
message… seconds
The number of seconds of message storage allowed for
messages between subscribers or guests. This field controls
the number of seconds of message storage for greetings. The
default value is 300 seconds.
Maximum recording
time for screening…
seconds
The number of seconds of message storage for callers to
record their name when a call is screened. The default value
is six seconds.
Amount to skip/forward
on rewind/
fast
-
forward… seconds
Accepts the number of seconds the messaging system moves
forward or backward through a message.
Short ending… seconds
The number of seconds that the messaging system waits for
callers to resume recording for fields that have less than 30
seconds of maximum recording time.
Long ending… seconds
The number of seconds that the messaging system waits for
callers to resume recording for fields that have more than 30
seconds of maximum recording time.
Beep on record
Select to set the system to play a beep before starting to
record. Use the frequency, amplitude, and duration fields to
control the sound and duration of the beep.
Disk full warning at…
minutes left
The number of minutes of recording time left on the voice
server hard disk when the system sends a warning message
to subscribers. The default number is 30 minutes.
Recording time left
The remaining amount of recording time available on the
messaging system.
Keypad
Displays the current keypad mapping rule.
Redirect with single
introduction
Select one of the following:
• Yes. Send the same introductory message to all
recipients of a redirected message.
• No. To have the system prompt subscribers to record a
different introduction for each recipient of a redirected
message.
Absolute date/time
stamp
Specifies how the system announces the date and time a
message was recorded:
• Yes. The system announces the exact date and time the
message was recorded. For example, the caller hears “July
4 at 5 P.M.” This is the default setting.
• No. The system announces the relative date and time
the message was recorded. For example, the caller hears
“July 4 at 5 P.M.” By default, this field is not selected.