NEC Univerge UM8000 User Manual Download Page 384

Page: 384 / 469

Page Field Descriptions

384

Call Management > System Operator Box - Messages

Field

Description

Allow callers to change
messages they just
recorded

Callers can change messages they have just recorded. Clear
the field to prevent changes.

Allow callers to leave
urgent messages

Asks unidentified callers if they want to mark a message as
urgent. Clear the field to prevent unidentified callers from
marking messages as urgent.

Mark all messages
urgent

Marks all messages from unidentified callers as urgent.

Maximum message
length to record from an
unidentified caller

Sets the maximum length of a message, in seconds, from an
unidentified caller. This setting applies only if the

Take a

message

action was selected on the System Operator Box >

Greetings page.

After taking a message

Specifies what the system does after recording a message
from the caller. This setting applies only if the

Take a

message

action was selected on the System Operator Box >

Greetings page. Select one of the following:

•

Route to.

Routes the caller to another system ID. If

selected, type the system ID or click

Search

and select a

system ID.

•

Route to operator.

Routes the caller to the system

operator box. This setting is not recommended for use
with the system operator box.

•

Hang up.

Disconnects without saying good

bye.

•

Say bye.

Plays a prompt asking if the caller needs

further assistance, pauses to wait for the caller to make a
selection, if there is no response, says good-bye and
disconnects.

•

Restart.

Returns the caller to the opening greeting box.

This setting is not recommended for use with the system
operator box.

Summary of Contents for Univerge UM8000






















































































































































































































































































































































































































































































Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands

NEC Univerge UM8000, User Manual

Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands