NEC Univerge UM8000 User Manual Download Page 365

Page: 365 / 469

Page Field Descriptions

365

Subscribers > Subscriber Template > Greetings

Field

Description

When the subscriber’s
extension is busy…
Enable busy greeting

Activates the greeting that plays when the subscriber’s
extension is busy. If the subscriber has no standard greeting
recorded and the

Enable busy greeting

field is not

selected, callers hear “<

recorded name

> is on the phone.”

After greeting

A group of settings that specify the action the messaging
system takes after playing the greeting.

•

Take a message.

Records a message for the owner of

the voice mailbox.

•

Take a message for group.

Records a message for the

specified group. If selected, type the name of the group or
search and select a group.

NOTE

NAME

THE

GROUP

CANNOT

EXCEED

TEN

CHARACTERS

INCLUDE

NUMBERS

SPACES

•

Route to operator.

Routes the caller to the system

operator box.

•

Route to.

Routes the call to another system ID. If you

select this setting, type the system ID or click

Search

and

select a system ID.

•

Hang up.

Disconnects without saying good

bye.

•

Say bye.

Plays a prompt asking if the caller needs

further assistance, pauses to wait for the caller to make a
selection, if there is no response, says good-bye and
disconnects.

•

Restart.

Returns the caller to the opening greeting box.

Summary of Contents for Univerge UM8000






















































































































































































































































































































































































































































































Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands

NEC Univerge UM8000, User Manual

Search results

Summary of Contents for Univerge UM8000

Reviews:

Brands by name

Popular brands