NEC ShieldPRO FC-N21S Ruggedised Notebook Computer
User’s Guide 0318-00002 Ver. 2.0 Dec 2008 – Page 157
2
Writing data to the floppy disk is disabled.
Action
Confirm that the floppy disk has been
formatted.
Confirm that the floppy disk is not
write-protected.
Confirm that the correct drive is selected
for writing.
Confirm that sufficient capacity remains
on the floppy disk.
Confirm that the floppy disk is not
damaged physically.
3
Reading data from the floppy disk is disabled.
Action
Confirm that the floppy disk has been
formatted.
Confirm that the correct drive is selected
for reading.
10.1.3.17.
Passwords
1
After password entry, the message "An invalid
password is entered" appears.
Action
Check the password again and re-enter it.
Check if the [Caps Lock] or [Num Lock]
key lamp is illuminated.
If [Caps Lock] key lamp is illuminated,
press
Caps Lock
to release it. Then
re-enter the password.
If [Num Lock] key lamp is illuminated,
press
Fn
+
F12
to release it. Then
re-enter the password.
2
You have forgotten the password.
Action
If you forget the Windows password,
there is no way to find the password
directly. Take any of the following actions:
o
Click
to the right of the
"type your password" field on the
Windows logon screen to check
the tip.
o
Logon to ShieldPRO with another
user account.
o
Ask a person with an
administrator account of
ShieldPRO to create a new
password.
If you forget the supervisor password,
contact your ShieldPRO Supplier
