NEC ShieldPRO FC-N21S Ruggedised Notebook Computer
User’s Guide 0318-00002 Ver. 2.0 Dec 2008 – Page 105
29. From the pop-up screen that detects the new CD, select [Open folder to view files] and press
OK
.
30. Open the DRV\WINXP directory of the CD and double click DRVCOPY.BAT to transfer all of
the drivers to the C:\WINXP\DRV directory.
31. To load the drivers into the Windows system, see “7.4 Installing Supplied Drivers and
Applications”.
After re-booting, the [Welcome to the Found New Hardware Wizard] dialog box may appear.
If this occurs, provide settings using the following procedure:
1. If [Welcome to the Found New Hardware Wizard] appears, click [No, not this time] and then
click [Next].
2. Click [Install the software automatically] and then click [Next].
Message [Please wait while the wizard installs the software …] appears.
3. If the [Completing the Found New Hardware Wizard] dialog box appears, click [Finish].
Because Windows XP automatically recognises a USB keyboard and mouse, specific settings are not
required.
To use a USB keyboard, [Standard 101/102 –Key or Microsoft Natural PS/2 Keyboard] or [PS/2 Compatible
Mouse] may appear when you click [Start]
[All Programs]
[Accessories]
[System Tools]
[System
Information] and select [Components]
[Problem Devices] in the [System Information] dialog box. This is a
view-only problem. The USB keyboard will operate normally without any problems.
If the keyboard or mouse is reconnected, the key layout may be set improperly.
If so, see "7.3.5.2 Change to keyboard or mouse of different key layout" below.
7.3.5.2.
Change to keyboard or mouse of different key layout
If the current keyboard or mouse is changed, the new keyboard or mouse may operate improperly.
If so, you need to change the key layout of the keyboard in the following procedure:
1. Click [Start]
[Control Panel].
2. Click [Regional and Language Options] and select the [Language] tab.
3. Click [Details…] button.
NOTE:
If you find the desired keyboard layout in the list of installed services, go to step 8.
4. Click [Add] in [Installed services].
5. Select the language of the keyboard layout to be added from the [Input language] list.
6. If [Keyboard layout/IME] has only a single option, click the option.