NEC ShieldPRO FC-N21S Ruggedised Notebook Computer
User’s Guide 0318-00002 Ver. 2.0 Dec 2008 – Page 110
3. Navigate to C:\WINXP\DRV\Modem.
4. Double click on the file
setup.exe
application.
5. Select
OK
to install the Modem driver.
6. A progress bar indicated the driver is being loaded.
7. If a [Hardware Installation] window appears indicating the Windows Logo test has not been
passed, press
Continue Anyway
.
8. When the progress bar screen disappears, the drivers have been loaded.
9. Check in [Start]
[Control Panel]
[Add or Remove Programs] that the “Agere Systems
AC97 Modem” is displayed.
7.4.4.3.
Deletion procedure
1. Start Windows.
2. Click [Start]
[Control Panel].
3. Double-click [Add or Remove Programs].
4. Click [Agere Systems AC97 Modem] and [Change/Remove].
5. If the [Confirm File Deletion] dialog box appears, click [Yes].
6. Follow the directions on the dialog box to uninstall the Modem utility.
7. When the uninstallation is complete, reboot ShieldPRO.
7.4.5.
LAN Drivers
The LAN drivers for the ShieldPRO are provided in the Drivers CD that is supplied with the product.
These drivers are preloaded with your factory supplied ShieldPRO.
In the case where the [Start]
[Control Panel]
[Network Connection] screen does not contain a
Local Area Connection, then the drivers must be reloaded.
In the case where Windows is re-installed on your ShieldPRO, these drivers must be reloaded.
7.4.5.1.
Supported operating systems
Microsoft Windows XP, English Ver. (SP2)
7.4.5.2.
Installation procedure
1. Start ShieldPRO.
2. Click on [Start]
[Control Panel]
[System]
[Hardware]
[Device Manager].
3. Double click the [Ethernet Controller] listed under Other Devices to display the [Ethernet
Controller Properties] screen.
4. Click on
Reinstall Driver
button in the General Tab.
5. At the [Hardware Update Wizard] screen select “No not this time” and click
Next.
