NEC ShieldPRO FC-N21S Ruggedised Notebook Computer
User’s Guide 0318-00002 Ver. 2.0 Dec 2008 – Page 112
7. A progress bar will indicate the drivers being loaded.
8. At the window indicating “Installation Complete” press
OK
.
9. Check the [Start]
[Control Panel]
[Network Connection] screen now contains a
Wireless Network Connection icon.
7.4.6.3.
Deletion procedure
1. Start Windows.
2. Click [Start]
[Control Panel].
3. Double-click [Add or Remove Programs].
4. Click [Intel PROSet/Wireless Software] and [Change/Remove].
5. If the [Confirm File Deletion] dialog box appears, click [Yes].
6. Follow the directions on the dialog box to uninstall the Wireless LAN utility.
7. When the uninstallation is complete, reboot ShieldPRO.
7.4.7.
Touch Panel Drivers
The Touch Panel drivers for the ShieldPRO are provided in the Drivers CD that is supplied with the
product. These drivers are preloaded with your factory supplied ShieldPRO.
In the case where Windows is re-installed on your ShieldPRO, these drivers must be reloaded.
7.4.7.1.
Supported operating systems
Microsoft Windows XP, English Ver. (SP2)
7.4.7.2.
Installation procedure
1. Start ShieldPRO.
2. Right click [Start]
[Explore].
3. Navigate to C:\WINXP\DRV\TouchPanel.
4. Double click on the file
setup.exe
application.
5. At the [Welcome TPDD] screen press
Next
.
6. At the [Select Language] screen select “English” and press
Next
.
7. At the [Select Controller] screen select “4/8 Wire-Type Touch Panel” and press
Next
.
8. At the [Select Clone File] screen, do not make any selections – just press
Next
.
9. Press
Agree
in the [Licence Agreement] screen.
10. Use the default folder to install the driver. Press
Next
.
11. Press
Finish
to conclude the setup.
12. Reboot ShieldPRO to load the driver.
13. Click [Start]
[Control Panel]
[System]
[Hardware]
[Device Manager].
