NEC N8100-1078F, User Manual

Page: 87 / 332

Configuring Your Server 4-19
CONFIGURING MOTHER BOARD JUMPERS
With the pre-installed SETUP utility, you can set desired passwords to protect the data stored in the
server against access from unauthorized users. When you forget the passwords, however, you may
want clear them. The following describes how to clear these passwords. You can also use the
following procedure to clear the CMOS data in the server.
IMPORTANT:
Clearing the CMOS data resumes the factory-set
configuration data.
To clear passwords or the CMOS data, use the jumper switch on the mother board of the server.
The following figure illustrates the jumper switch location.
IMPORTANT:
Do not change any other switch settings. Any
change may cause the server to fail or malfunction.
: Strap
N.A. N.A.
Preserves
the contents
of CMOS* Enables
password
protection* N.A. Clears
CMOS Disables the
password N.A.
* Factory-set