NEC N8100-1078F, User Manual

Page: 82 / 332

4-14 Configuring Your Server
Server
Option Parameter Description Your Setting
System
Management N/A System Management submenu is
displayed.
Serial Console
Features N/A Serial Console Features submenu is
displayed.
Event Log
Configuration N/A Event Log Configuration submenu is
displayed.
Assert NMI on
PERR Disabled
[Enabled] Indicates whether PCI PERR is
supported or not.
Assert NMI on
SERR Disabled
[Enabled] Indicates whether PCI SERR is
supported or not.
Resume on AC
Power Loss [Stays Off]
Power On Indicates the AC LINK function. Shows
the state of the power of the server.
FRB-2 Policy [Retry on Next
Boot]
Disable FRB2
Timer Selects action if the boot processor will
be disabled.
Late POST
Timeout [Disabled]
5 minutes
10 minutes
15 minutes
20 minutes Selects time limit for searching add-in
card. The system will be reset on
timeout.
Hard Disk OS
Boot Timeout [Disabled]
5 minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes Selects time limit for booting an
operating system installed in the hard
disk drive. The action taken on timeout
is determined by the Fault Resilient Boot
Timer policy option.
PXE OS Boot
Timeout [Disabled]
5 minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes Selects time limit for booting an
operating system using PXE boot. The
action taken on timeout is determined by
the OS Watchdog Timer policy option.