NEC N8100-1078F, User Manual

Page: 76 / 332

4-8 Configuring Your Server
Floppy Configuration submenu
Option Parameter Description Your Setting
Floppy A Disabled
720KB 3.5
[1.44 MB 3.5]
2.88MB 3.5 Set the settings of floppy disk
drive A (standard configuration).
Onboard Floppy
Controller Disabled
[Enabled] Disables or enables the onboard
floppy drive controller.
[ ]: Factory-set
Super I/O Configuration submenu
Option Parameter Description Your Setting
Serial Port A Address Disabled
[3F8/IRQ4]
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3 Disables or selects the I/O port
address and interrupt for serial
port A.
Serial Port B Address Disabled
3F8/IRQ4
[2F8/IRQ3]
3E8/IRQ4
2E8/IRQ3 Disables or selects the I/O port
address and interrupt for serial
port B.
[ ]: Factory-set
USB Configuration submenu
Option Parameter Description Your Setting
USB Devices Enabled –
Display only. Displays a list of
USB devices detected by BIOS.
USB Function Disabled
[Enabled]
If disabled, the USB ports do not
accept the USB device class 3
(HID: Human Interface Device).
Legacy USB Support Disabled
Keyboard Only
[Auto]
Keyboard and Mouse Selects whether the USB
keyboard is made available in
OS which does not support USB
formally.
Port 64/60 Emulation
[Disabled]
Enabled Enables I/O port 60h/64h
emulation for using the USB
keyboard with the non-USB
aware operating systems.
USB 2.0 Controller [Enabled]
Disabled
Enables or disables the USB 2.0
controller.
USB 2.0 Controller
Mode FullSpeed
[HiSpeed] Selects the transfer speed on
USB 2.0.
USB Mass Storage
Device Configuration N/A Displays the USB Mass Device
Configuration submenu.
[ ]: Factory-set