NEC N8100-1078F, User Manual

Page: 254 / 332

9-36 Upgrading Your Server
Installation
Install a DIMM in the following procedure.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the components as follows:
„
Side cover
„
Processor air duct
3.
Confirm the socket in which a DIMM is installed.
4.
Open the levers at both ends of the socket.
IMPORTANT:
To avoid damaging the lever, do not apply an excess
force to the lever.
5.
Push the DIMM to the socket straight.
NOTE:
Use extreme care when installing a DIMM. Applying too
much pressure can damage the socket. Keyed DIMMs insert only one
way.
If the DIMM is inserted into the DIMM socket, the lever is automatically closed.