NEC N8100-1078F, User Manual

Page: 247 / 332

Upgrading Your Server 9-29
Installation
Install a CPU in the following procedure.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the components as follows:
„
Side cover
„
Processor air duct
3.
Locate the CPU socket which you are going to install CPU.
4.
Raise the locking lever on the socket.
IMPORTANT:
Open the lever until it stops. The bar can be opened to
approx. 120 degrees.
5.
Aligning the pins of the CPU with the socket, insert the CPU slowly and gently into the
socket.
IMPORTANT:
Be aware of CPU direction. Pin layouts on two
corners among four differ from others to prevent an incorrect insertion.
Confirm the pin mark and pin layout on the socket, and insert the CPU
correctly.
Pin mark