manualshive.com logo in svg

NEC N8100-1078F, User Manual

Share
Download
NEC N8100-1078F User Manual Download Page 188

8-6  Troubleshooting

LAN Connector Lamps

The LAN connector on the rear panel has two lamps as follows.

„

 

LINK/ACT lamp

The link/ACT lamp indicates the state of each network port normally equipped with the
server.    If the power is supplied to the server and the hub and they are correctly
connected with each other, the lamp is lit green (LINK state).    If information is
transmitted through a network port, the lamp blinks green (ACT state).

If the lamp is not lit in the LINK state, check the network cable and the cable connection.
If the lamp is not lit still after the checking, the network (LAN) controller may be defected.
Contact your service representative.

„

 

1000/100/10 lamp

The 1000/100/10 lamp indicates whether each of the network ports normally equipped
with the server is operated through the 1000BASE-T, 100BASE-TX or 10BASE-T
network interface.    If the lamp is lit amber, the network port is operated through
1000BASE-T.    If the lamp is lit green, the network port is operated through 100BASE-
TX. If the lamp is off, the network port is operated through 10BASE-T.

LINK/ACT lamp

Speed lamp

Summary of Contents for N8100-1078F













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands