NEC N8100-1078F, User Manual

Page: 126 / 332

5-26 Installing the Operating System with Express Setup
Microsoft Windows 2000
This subsection provides information on installing Microsoft® Windows® 2000 in the server.
Read instruction in this section before proceeding the installation.
NOTE: If you install Windows 2000 without using Express Setup, see
Appendix D.
Installation Notice
This section explains precautions and matters you should be aware of before beginning installation
in order to install Windows 2000 correctly.
Supported OS on this model
The server supports the following edition:
„
Microsoft Windows 2000 Server (hereinafter, referred to as "Windows 2000")
On installing other OS, contact sales dealer or the maintenance service representative.
Installing Optional Mass Storage Driver
To install optional mass storage driver, see "Installing Optional Mass Storage Driver" of
"Configuration Diskette Creator" in Chapter 6 to create setup inf file.
BIOS Specification
Before installing Windows 2000, confirm if the BIOS specification of the hardware is correct. On
BIOS specification, there are some items to specify for the new functions provided from Windows
2000 (Plug and Play, support for USB interface and so on). See Chapter 4 to specify them.
NEC ESMPRO Agent
On Windows 2000 systems, the ESMPRO Agent needs the necras.sys driver. To install the
necras.sys, run the System update from NEC EXPRESSBUILDER CD-ROM.
Optional Board Supported by NEC EXPRESSBUILDER
„
Supporting installation of OS in NEC EXPRESSBUILDER
–
N8103-75F SCSI Controller
– N8103-78F Disk Array Controller (SATA)
– N8103-80F Disk Array Controller (SCSI 1ch)
– N8103-89 Disk Array Controller
– SATA HostRAID (Onboard Adaptec HostRAID controller)
„
Other optional boards
–
N8103-56F SCSI Controller
– N8103-65F SCSI Controller
– N8103-95 SCSI Controller