manualshive.com logo in svg

NEC N8100-1078F, User Manual

Share
Download
NEC N8100-1078F User Manual Download Page 86

4-18  Configuring Your Server

Exit

The options on the menu are described below.

Save Changes and Exit

Exit after writing all modified BIOS SETUP item values to CMOS.

Discard Changes and Exit

Exit leaving CMOS unmodified. User is prompted if any of the setup fields ware modified.

Discard Changes

Read the previous values of the all BIOS Setup items from CMOS.

Load Setup Defaults

Load default values for all BIOS Setup items.

IMPORTANT:

 This option sets [Configure S-ATA as RAID] in the

[IDE Configuration] submenu of the [Advanced] menu to [Disabled]. If
the SATA hard disk drives are installed in your server and the onboard
SATA RAID feature is used, change the parameter of the [Configure S-
ATA as RAID] from [Disabled] to [Enabled] before exiting BIOS
SETUP utility.

Load Custom Defaults

Load custom defaults.

Save Custom Defaults

Save the current settings as custom defaults.

Summary of Contents for N8100-1078F













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands