NEC N8100-1078F User Manual Download Page 301

Page: 301 / 332

Installing Windows Server 2003 E-9

If the optional board is installed, select the proper SCSI Adapter and press

Enter

–

Adaptec Ultra320 SCSI Cards (WinXP/Server 2003 IA-32) (When N8103-75F board is
installed.)

–

LSI MEGARAID Products for Windows 2003 (x86) (When N8103-80F board is
installed.)

Continue performing tasks according to the subsequent messages that appear.

10.

Update the system.

11.

Install the driver and make detailed settings.

If PROSet is already installed, uninstall the PROSet before upgrading.

If the teaming function is enabled, disable the function before uninstalling PROSet.

During upgrade installation, [Disk Insert] dialog box may appear.

If it appears, click Cancel.

When upgrade installation is completed, [Device Driver Wizard] dialog box may appear.

If it appears, click Cancel, then update the system.

Summary of Contents for N8100-1078F













































































































































































































































































































































Search results

Summary of Contents for N8100-1078F

Reviews:

Brands by name

Popular brands

NEC N8100-1078F, User Manual

Search results

Summary of Contents for N8100-1078F

Reviews:

Brands by name

Popular brands