NEC N8100-1078F, User Manual

Page: 85 / 332

Configuring Your Server 4-17
Console Redirection Submenu
Option Parameter Description Your Setting
BIOS Redirection
Port [Disabled]
Serial Port A
Serial Port B Specify the address/interrupt of the
serial port to which a remote console
is connected.
Baud Rate 9600
[19.2K]
38.4K
57.6K
115.2K Specify the baud rate used for the
interface with successive remote
consoles.
Flow Control No Flow Control
[CTS/RTS]
Xon/Xoff
CTS/RTS+CD Specify the flow control method.
Terminal Type PC ANSI
[VT100+]
VT-UTF8 Specify the type of remote console.
ACPI Redirection
Port [Disabled]
Serial Port A
Serial Port B Specify the serial port to which an
ACPI console is connected.
[ ]: Factory-set
Event Log Configuration submenu
Option Parameter Description Your Setting
Clear All Event Logs [Disabled]
Enabled Press Enter and select "Enable"
to initialize the system event log.
BIOS Event Logging Disabled
[Enabled] Select to allow logging of BIOS
events.
Critical Event Logging Disabled
[Enabled] Select to allow logging of the
critical system errors. The critical
system errors are fatal to system
operations such as PERR,
SERR, ECC.
ECC Error Logging Disabled
[Enabled] Select to allow logging of ECC
error events.
PCI Error Logging Disabled
[Enabled] Select to allow logging of PCI
error events.
FSB Error Logging Disabled
[Enabled] Select to allow logging of front-
side bus error events.
Hublink Error Logging Disabled
[Enabled] Select to allow logging of hublink
error events.
[ ]: Factory-set