manualshive.com logo in svg

NEC N8100-1078F, User Manual

Share
Download
NEC N8100-1078F User Manual Download Page 31

General Description  2-3

SYSTEM CHASSIS

Names and functions of the components are shown below.

Front View

1 Front door

Open this door to access the POWER switch, 5.25-inch devices, the CD-ROM drive, or the
floppy disk drive, or to install/remove hard disks to 3.5-inch bays.    You can lock the front door
using the provided security key.

2 Key hole

Insert the security key to lock/unlock the front door.

3 Stabilizers (4)

Use the stabilizers to prevent the server from falling down.

4 LAN ACCESS lamp (green)

Lights in green while the server is connected to the network.    Blinking in green indicates the
network activity.

5 DISK ACCESS lamp (green)

Lights in green while the internal hard disk is in access.

6 POWER/SLEEP lamp (green)

Lights in green when the server is powered on.    When the server is powered off.    Blinks
when the system is placed in the sleep mode.

7 STATUS lamp (green/amber)

Lights in green while the server is in successful operation.    When any error is detected, this
lamp lights in amber.

1

2

4

5

6

3

7

Summary of Contents for N8100-1078F













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands