NEC N8100-1078F, User Manual

Page: 134 / 332

5-34 Installing the Operating System with Express Setup
IMPORTANT:
„
You can not go to the next screen if the specification is incorrect.
„
On specification, an error may occur in relationship with the
specified contents of the former screen and require to go back to
modify the specification.
„
During the setup, the screen to specify the partition that Windows
2000 is to be installed appears. The first 55MB area displayed on
the screen is a partition that is used to store the configuration
information or utilities unique of the server. We do not recommend
to delete this area, but if you do not want to reserve this 55MB
area, perform the installation by manual setup. It is unable to
delete this area by Express Setup.
NOTES:
„
If you click [Cancel] in [Basic Information] screen, the screen will
go back to select the OS. [Cancel] exists only in [Basic
Information] screen.
„
If you click [OK] in [Role of Computer] screen, the setup
automatically selects default value for the later specification to
continue the installation.
13.
Copy the modules for the optional mass storage driver.
If you want to install the optional mass storage driver, insert the floppy disk attached to
mass storage driver into the floppy disk drive and follow the message to operate the
installation.
NOTE:
You can use this function only when the floppy disk drive is
attached to the system.
14.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive according to
the message.
If you proceed the setup by using setup parameter file, remove the floppy disk from the
floppy disk drive.
Insert Windows Server 2003 CD-ROM into the CD-ROM drive.
[Agree Software License Agreement] screen appears.