NEC N8100-1078F, User Manual

Page: 40 / 332

2-12 General Description
STANDARD FEATURES
High performance Expandability
„ Intel  Xeon

Processor
„ DDR333 integrated SDRAM
„ High-speed 1000BASE-T/100BASE-TX/
10BASE-T interface
(1000Mbps/100Mbps/10Mbps supported)
„ High-speed disk access
(Two serial ATA channels)
„ Wide variety of optional I/O slots
Two 64-bit, 66MHz PCI-X slots
Two 32-bit, 33MHz PCI slot
One PCI EXPRESS Slot
„ Large memory of up to 4 GB
„
Four hard disk drive bays
„ Remote power-on feature
„ Up to two Intel Xeon processors
„ USB interface (A USB-support driver is
required.)
„ Convert to rack-mount type (N8143-56F
Rack Conversion Kit is required.)
High-reliability Many Available Features
„
Graphic accelerator "RAGE XL" support
„ El Torito Bootable CD-ROM (no emulation
mode) format support
„ POWER switch mask
„ Software power-off
„ Remote power-on feature
„ AC-LINK feature
Self-diagnosis
„
Memory monitoring feature (single-bit
error correction/double-bit error detection)
„ CPU/memory degradation feature (logical
isolation of a failed device)
„ Temperature detection
„ Error notification
„ Internal fan monitoring feature
„ Internal voltage monitoring feature
„ BIOS password feature
„ Security feature (security lock)
„ Disk array (option)
„ Hot Swap SATA/SCSI HDD (optional)
„ Power On Self-Test (POST)
„ Test and Diagnosis
Management Utilities Maintenance Features
„ NEC ESMPRO „ Memory dump feature using the DUMP
(NMI) switch
Power Saving Feature Easy and Fine Setup
„ Sleep feature
(available for Windows 20003/2000)
„ NEC EXPRESSBUILDER (system setup
utility)
„ Onboard SATA RAID configuration utility
„ SETUP (BIOS setup utility)
„ Configuration Diskette Creator