NEC N8100-1078F, User Manual

Page: 111 / 332

Installing the Operating System with Express Setup 5-11
11.
Select the Windows family.
Select "Microsoft Windows Server 2003 Standard Edition Microsoft Windows Server
2003 Enterprise Edition" category.
NOTE:
If you select "Skip" at step 8, this menu does not appear.
Go on the step 13.
12.
Next, [Basic Information] wizard appears. Confirm the parameters, modify if necessary,
and then click [Next].
After that, click [Next], [Back], or [Help] on the screen to continue. Modify the
parameters each time if necessary.
IMPORTANT:
„
Reserve the partition to install the OS more than the minimally
required size.
„
If you select "Use Existing Array" at "New/Existing RAID
Configuration", the information included in the first partition
(excluding maintenance partition) will all be formatted and deleted.
The information included in the other partition will be retained.
In the figure below, describes the partition which information will
be deleted when maintenance partition exists.
First Partition
<Maintenance Partition>
Retained
Second
Partition
Deleted
Third
Partition
Retained
Fourth
Partition
Retained
„
You can not re-install the system with the existing partition that is
upgraded to Dynamic Disk remained. Do not select "Use
Existing Array" at "New/Existing RAID Configuration".
„
If you specify other than 4095MB for the "Installing Partition", it
is necessary to convert to NTFS.
„
If "Use Existing Array" at "New/Existing RAID Configuration" is
selected but the partition other than the one to install Windows
Server 2003 does not exist (excluding maintenance partition),
Express Setup will reserve the maximum area of the hard disk to
install Windows Server 2003.
„
You can not go to the next screen if the specification is incorrect.
„
On specification, an error may occur in relationship with the
specified contents of the former screen and require to go back to
modify the specification.
„
During the setup, the screen to specify the partition that Windows
Server 2003 is to be installed appears. The first 55MB area
displayed on the screen is a partition that is used to store the
configuration information or utilities unique of the server. We do
not recommend to delete this area, but if you do not want to
reserve this 55MB area, perform the installation by manual setup.
It is unable to delete this area by Express Setup.