manualshive.com logo in svg

NEC N8100-1078F, User Manual

Share
Download
NEC N8100-1078F User Manual Download Page 23

Notes on Using Your Server    1-7

During Operation

CAUTION

Stay away from the fan.

Keep your hand or hair away from the cooling fan on the rear of the server.
Failure to follow this warning may get your hand or hair caught in the fan,
resulting in injury.

Avoid contact with the server during thunderstorms.

Disconnect the power plug from the outlet when a thunderstorm is approaching.
If it starts thundering before you disconnect the power plug, do not touch any
part of the server including the cables.    Failure to follow this warning may cause
a fire or an electric shock.

Keep animals away from the server.

Failure to follow this warning may cause a fire or an electric shock.

Do not place any object on top of the server.

The server may fall and cause property damage to the surroundings.

Do not use a cellular phone or pager around the server.

Turn off the cellular phone or pager.    Radio interference may cause
malfunctions of the server.

Summary of Contents for N8100-1078F













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands