![background image](http://html1.mh-extra.com/html/nec/n8100-1078f/n8100-1078f_user-manual_4225291198.webp)
8-16 Troubleshooting
Fail to access the hard disk:
(Refer to the documentation supplied with the disk array controller.)
T
Is the hard disk applicable to the server?
→
Operation of any device that is not authorized by NEC is not guaranteed.
T
Is the hard disk properly installed?
→
Make sure to lock the hard disk with the lever on its handle. The hard disk is not
connected to the internal connector when it is not completely installed (see
Chapter 9).
Fail to access the (internal or external) SCSI devices:
T
Is the SCSI device applicable to the server?
→
Operation of any SCSI device that is not authorized by NEC is not guaranteed.
T
Is the cable connection changed?
→
The SCSI connector on the motherboard in the server can be used for either built-
in file devices or external SCSI devices. The connection to built-in or external
devices can be switched by modifying cable connection properly. See Chapter
10.
T
Are SCSI devices properly configured?
→
When the server has external SCSI devices connected, hard disk settings,
including SCSI ID and terminator, are required. Refer to the manual that comes
with the SCSI device for details.
T
Are the SCSI controllers properly configured?
→
Use the SCSI configuration utility for proper configuration of SCSI devices
connected to the optional SCSI connector on the mother board. When the server
has an optional SCSI controller installed and SCSI devices connected to it, use
the SCSI configuration utility that comes with the optional SCSI controller for
proper configuration. See the manual that comes with the optional SCSI
controller for details.
Summary of Contents for N8100-1078F
