NEC iPASOLINK EX Advanced, Instruction Manual

Page: 175 / 793

3-30 SECURITY MANAGEMENT
GGS-000547-01E
iPASOLINK EX Advanced:
S
ET
N
ETWORK AND
S
YSTEM
P
ROVISIONING
5. Assign the appropriate value to each parameter:
Figure 3-27 NTP Setting Option Window
Table 3-16 NTP Setting Parameters
Parameter Value Description
NTP Enable
Enable/Disable the NTP Protocol on the equipment.
Disable
NTP Server Mode Multicast
Specify the NTP Server mode.
Unicast
Disabled
NTP Client Mode Multicast
Specify NTP Client mode.
Unicast
Disabled
Stratum 2
to
15
Set Stratum level of the NTP Time Packets. The
lowest Stratum should be received in NTP PDU plus
1.
NTP Authentication Enable
Enables the use of NTP Authentication.
Disable
Disables the use of NTP Authentication.
Multicast Auth Key
Index Not Used
To assign the Auth Key Index, select the index number
from the drop-down list. Otherwise, select
Not Used .
(available Auth Key Index #)
Multicast Port Bridge01
to
Bridege06
Select a port to output the Multicast Time information.
This parameter is enabled when
NTP Server Mode
selects
Multicast
.
Multicast Interval 16
to
131072s
Select Multicast Interval. [unit: second]