NEC iPASOLINK EX Advanced, Instruction Manual

Page: 32 / 793

MOUNT iPASOLINK EX/A 4-1
iPASOLINK EX Advanced: I
NSTALLATION
GGS-000546-01E
4. MOUNT iPASOLINK EX/A
This section provides the installation procedures to mount iPASOLINK EX/A and its
Antenna onto a Pole. For the detailed descriptions for the Antenna Installation, see
the instruction manual attached to the Antenna.
Tools required for the installation are listed below.
4.1 For Placing Equipment

NOTICE
1.
iPASOLINK EX/A (equipment) generates non-ionizing radiation. Installing the
equipment indoors may affect, which needs to take the adequate measures,
if occurs.
2. The equipment should be installed in the appropriate site. Do not install it on
a slant or unstable spot. Improper installation raise the temperature inside the
equipment, which may damage the equipment.
3. iPASOLINK EX/A should be installed as follows.

Accessing to the equipment is only by the SERVICE PERSONNEL or by
users who are WELL TRAINED WITH ENOUGH SKILLS AND
KNOWLEDGES regarding these restrictions, precautions and installation
sites.

Accessing must be protected using a tool, locks, keys, and/or other means
of security, which should be managed by the authority who is responsible
for the installed site.

The other end of the Grounding terminal should be connected to the
station earth point. For details, refer to
6. GROUND iPASOLINK EX/A
section.
Following show the methods of direct-mounting antenna. Depending on configuring
system, the mounting methods differ.
Table 4-1 Tools
TOOLS
Wrench or Monkey Wrench
Screwdriver
Torque Wrench