NEC iPASOLINK EX Advanced, Instruction Manual

Page: 247 / 793

5-20 NETWORK MANAGEMENT
GGS-000547-01E
iPASOLINK EX Advanced:
S
ET
N
ETWORK AND
S
YSTEM
P
ROVISIONING
5.
When completed, click the
OK
button.
6.
Information
dialog box appears. Click the
OK
button to proceed.
Figure 5-26 Information Dialog Box
7. LLDP Setting window updates the information. Verify the displayed information.
Figure 5-27 LLDP Setting Window
This step ends the procedure.
Table 5-6 LLDP Setting Parameters
Parameter Value Description
TX Interval 5
to
32767
Specify the transmission interval. [unit: second]
TX Hold 2
to
10
Specify the time-to-live value expressed as a multiple of TX
Interval. [unit: times]
Item / Port NMS
——
Link
(read only) Indicates the current state.
LLDP Usage Used
Select to set Use or Not to Use the Link Layer Discovery Protocol.
Selecting
Used enables the LLDP Mode option below.
Unused
LLDP Mode Standard
Enables to run the standard LLDP MAC.
Proprietary MAC
Enables to run NEC proprietary LLDP MAC. This option is helpful
to locate an iPASOLINK where an L2SW discarding standard
LLDP frames is in between two iPASOLINKs’ management ports.