NEC Express5800/T120a-E N8100-1531F User Manual Download Page 510

Page: 510 / 542

F-2 Installing Windows Server 2003

Service Pack Which EXPRESSBUILDER Supports

The NEC EXPRESSBUILDER DVD attached to the server supports following combination of the
OS installation media and Service Pack.

Windows Server 2003 R2

–

OS installation media (with Service Pack 2)

–

OS installation media (No Service Pack) + Service Pack 2

–

OS installation media (No Service Pack)

Windows Server 2003

–

OS installation media (with Service Pack 1)

–

OS installation media (with Service Pack 1) + Service Pack 2

Application of Service Pack

You can install the Service Pack on the server. When the Service Pack is not attached to your system,
prepare it by yourself.

When installing Windows Server 2003 R2, it is not necessary to apply Service Pack 1.

Updating System

If you modified the Windows system, execute "Update Express5800 system" in the Autorun Menu.

Re-installing to the Hard Disk which has been upgraded to Dynamic
Disk

If you want to leave the existing partition when installing the system on the hard disk upgraded to
Dynamic Disk, note the following issue:

Do not select the partition that OS had been installed as the partition to install the OS
newly.

Select "Use the current File System" for the format of OS partition.

Mounting MO Device

Do not mount an MO device on your server during the Windows installation.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Express5800/T120a-E N8100-1531F

Reviews:

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 510 / 542

Search results

Summary of Contents for Express5800/T120a-E N8100-1531F

Reviews: