NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 132 / 542

4-62 Configuring Your Server
Default settings and their explanation
Item Default Description Change
Battery Backup Present
None Displays Properties of additional
battery.
•
When battery is installed: Present
•
When battery is not installed: None
–
Set Factory Defaults No – Prohibited *1
Cluster Mode Disabled – Prohibited
Rebuild Rate 30 Recommended value: 30 Permitted
BGI Rate 30 Recommended value: 30 Permitted
CC Rate 30 Recommended value: 30 Permitted
Reconstruction Rate 30 Recommended value: 30 Permitted
Controller BIOS Enabled – Prohibited
NCQ Disabled – Prohibited
Coercion Mode None – Prohibited
S.M.A.R.T Polling 300 – Prohibited
Alarm Control Disabled Disabled: Does not issue an alarm.
Enabled: Issues an alarm.
Silence:
Stops an alarm if beeped.
Permitted *2
Patrol Read Rate 30 Recommended value: 30 Permitted
Cache Flush
Interval 4 – Prohibited
Spinup Drive Count 2 – Prohibited
Spinup Delay 12 – Prohibited
StopOnError Disabled – Prohibited
Drive Powersave Disabled – Prohibited
Stop CC On Error No
Yes Specify the operation at error detection
in Consistency Check.
No: Recover and resume.
Yes: Abort Permitted
Maintain PD Fail
History Enabled – Prohibited
Schedule CC Supported Set the scheduled consistency check. Permitted
CC Frequency Disabled Set the interval of scheduled
consistency check.
*3
Disabled: Disables the scheduled
consistency check.
Continuous: Checks consistency
continuously.
Hourly: Checks consistency every hour.
Daily: Checks consistency every day.
Weekly: Checks consistency every
week (recommended value).
Monthly: Checks consistency every
month (recommended value).
Permitted
CC Start Time 12:00 AM Set the time to start the first consistency
check. Permitted