manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 415 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 415

Upgrading Your Server  9-69

 

8. 

Move the jumper pin for optional fan unit on mother board. Connect the two cooling fan
cables (for optional fan unit) to the connectors on mother board.

Take care to connect the cable to the proper connector. Otherwise, NEC ESMPRO will
fail to monitor the server.

 

9. 

Install the duct cover you have removed, and secure it with a screw.

 

10. 

Install the left side cover you have removed.

Removal

The additional fans can be removed in the reverse order of the installation.

Connector for standard fan
unit (rear fan)
(FAN1 connector)
When connecting the
optional fan, be sure to
connect the rear cooling fan.

Mother board

Move the jumper pin upward to enable the redundant fan.

Connector for optional
fan unit (rear fan)
(FAN2 connector)

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments