manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 48 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 48

2-18  General Description

USING YOUR SERVER

This section describes basic operations of your server including how to use devices such as the
floppy disk drive and the optical disk drive. See Appendix B for notes on using the floppy disk,
DVD/CD-ROM, and accessories including the keyboard and the mouse.

POWER Switch

Use the POWER/SLEEP switch to turn on/off the server.

Power On

Press the POWER switch on the front of the computer chassis.

The POWER/SLEEP lamp lights in green.

IMPORTANT:

„

 

If the power cord is connected to a power control device such as a
UPS (Uninterruptible Power Supply), make sure that the power
control device is powered.

„

 

Do not turn off the server until characters appear on the screen.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments