manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 452 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 452

D-16    Installing Windows Server 2008

 

5.

 

Change the password, and then click the 

 button.

NOTE:

 Computer name and Administrator password that satisfy the

next condition, are required.

„

 

More than 6 characters

„

 

Contains characters from three of the following categories (numbers,
uppercase letters, lowercase letters, and signs).

 

6.

 

When the following message appears, click [OK].

 

7.

 

At the command prompt, enter user information.

NOTE:

 For more detailed procedure, see the "Microsoft Windows

Server 2008 Step-By-Step Guide".

After installations is completed, be sure to execute the tasks described in "Setup of Device Driver
(Normally Install in Server)" and "Updating the System" of this chapter.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments