manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 375 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 375

Upgrading Your Server  9-29

Onboard LAN Controller Considerations

It is possible to configure the Teaming feature of AFT (Adapter Fault Tolerance)/ALB (Adaptive
Load Balancing) with the onboard LAN controllers. But it is impossible to configure the Teaming
function of the same AFT/ALB with the onboard network controller and an optional LAN board.

Installation

Install the board to be connected to the PCI board slot depending in the following procedure. Refer
to the manual provided with the board for details.

 

1. 

Before the installation, set the switches and jumpers on the installed board appropriately
referring to the manual provided with the board, if necessary.

 

2. 

See the section "Preparing for Installation and Removal" described earlier to prepare.

 

3. 

Remove the left side cover.

 

4. 

Remove a setscrew from the duct cover, and remove the duct cover.

 

5. 

Remove the additional slot cover at the same location (height) as the installation slot.

IMPORTANT:

 Store the removed slot cover for future use.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments