manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 106 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 106

4-36  Configuring Your Server

 

3. 

When a confirmation message (Proceed?) is displayed, select "Yes."

The SCAN DEVICE starts (scanning information is displayed at the bottom of the screen).
Upon completion of SCAN DEVICE, the "New Configuration - ARRAY SELECTION
MENU" screen appears.

 

4. 

Move the cursor onto the hard disk drive to be packed by using cursor key and then press

Space

 to select the hard disk drive.

The display for the selected hard disk drive changes from READY to ONLINE.

 

5. 

Press 

F10

 to set "Select Configurable Array(s)".

 

6. 

Press 

Space

.

SPAN-1 is set.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments