NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 456 / 542

D-20 Installing Windows Server 2008
9.
Select the type of installation you want.
[Custom (advanced)] is selected below.
10.
You will be asked, "Where do you want to install Windows?".
‰
If the Internal RAID Controller (equivalent to N8103-116A) or
N8103-116A/117A/118A is used,
Select [Load Driver], and then click [Browse].
The folder reference dialog box appears. Select a path to the folder in the NEC
EXPRESSBUILDER DVD, and then click [OK].
– Windows Server 2008 64-bit (x64) Edition:
<drive letter>:\010\win\winnt\oemfd\ws2008x64\fd1\megasas
– Windows Server 2008 32-bit (x86) Edition:
<drive letter>: \010\win\winnt\oemfd\ws2008\fd1\megasas
After you select the path, a list of drivers is displayed.
Select the following driver, and then click [OK]. Go to Step 11.
– [LSI Logic MegaRAID SAS 8708EM2 RAID Controller]
‰
If the Internal RAID Controller (equivalent to N8103-116A) or
N8103-116A/117A/118A is not used,
Go to Step 12.
11.
Remove the EXPRESSBUILDER and set Backup DVD-ROM or Windows Server 2008
DVD-ROM.
12.
Select the disk where a partition will be created, and then click [Drive Option].
IMPORTANT:
If the partition has already been created, go to step 16.