manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 203 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 203

Installing the Operating System with Express Setup    5-25

Network Driver

Specify the details of network driver.

Two standard network drivers that are mounted will be installed automatically, but the link speed
and Duplex mode need to be specified manually.

 

1. 

Open the [Device Manager].

 

2. 

Double-click [(Network Adapter Name)] in the list.

 

3. 

Click the [Link Speed] and specify the [Speed & Duplex] value the same as the value
specified for HUB.

 

4. 

Click [OK].

 

5. 

Restart the system.

Also, add or delete any protocols and services if necessary.

You can operate the process on the property dialog box for local area network which can be
appeared from [Network and Dial-up Connection].

NOTE:

 We recommend you to add [Network Monitor] at [Adding

Services].

[Network Monitor] can monitor the frame (or the packet) that the
computer installing [Network Monitor] sends or receives. This tool is
valuable when analyzing network trouble. For information on how to
install the tool, see the "Setting for Solving Problems" described later
in this chapter.

Optional Network Board Driver (N8104-112/119/120/121/125)

The following optional network boards are available for the N8104-112/119/120/121/125.

To use the N8104-125 Adapter, see" Using N8104-125 Adapter after System Update" in the
previous page.

The drivers for other network boards are automatically installed by Windows Plug-and-Play. You do
not need to install them manually.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments