NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 486 / 542

E-8 Installing Windows Server 2003 x64 Editions
7.
Select the [Intel(R) ICH10R SATA AHCI Controller] and press Enter .
The screen of Step 5 is displayed.
‰ If the Internal RAID Controller (equivalent to N8103-116A)or
N8103-116A/117A/118A is used:
Press S .
The screen of Step 6 is displayed. Press
Enter
, and go to Step 8.
‰ If the Internal RAID Controller (equivalent to N8103-116A) or
N8103-116A/117A/118A is not used:
Go to Step 9.
8.
Select the proper Controller and press
Enter
.
The screen of Step 5 is displayed.
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 for x64)]
(When Internal RAID Controller (equivalent to N8103-116A) is installed.)
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 for x64)]
(When N8103-116A/117A/118A RAID Controller is installed.)
– [LSI Embedded MegaRAID (Windows XP/2003 64-bit)]
(When Onboard RAID Controller (LSI Embedded MegaRAID

) is used.)
9.
<If the SCSI Controller N8103-75/107 is connected>
Press S .
The screen of Step 6 is displayed. Press
Enter
, and go to Step 10.
<If the SCSI Controller N8103-75/107 is not connected>
Press Enter , and go to Step 11.
10.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra320 SCSI Cards (Windows 64-bit)] and press Enter .
IMPORTANT:
If the following message is displayed when you use
the N8103-75/107 SCSI controller, press S .
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra 320 SCSI Cards
(Windows64-bit)"
Unless the device manufacturer prefers that
you usethe driver on the floppy disk, you
should use the driver in Windows.
The screen of Step 5 is displayed.
Press Enter , and go to Step 11.