manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 197 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 197

Installing the Operating System with Express Setup    5-19

 

16. 

The Express Setup will start when you click [Perform] in [Start Express setup] step.

 

17. 

Copy optional Mass Storage Driver module.

If you install optional Mass Storage Driver, the message will be shown.

Insert CD-ROM or floppy disk attached to the Mass Storage Driver and proceed operation
according to the message.

 

18. 

Remove NEC EXPRESSBUILDER DVD from the optical disk drive according to the
message.

If you proceed the setup by using setup parameter file, remove the floppy disk from the
floppy disk drive.

 

19. 

Insert Windows Server 2008 DVD-ROM into the optical disk drive.

NOTE:

 Windows Server 2008 and selected applications will be

installed automatically and reboots several times.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments