NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 124 / 542

4-54 Configuring Your Server
Notes on Creating Virtual Drive
1.
The Hard Disk Drives configuring the drive group should have the same capacity and
rotation speed.
2.
Be sure to execute Consistency Check after creating VD.
3.
When installing an OS in VD under the Internal RAID Controller (equivalent to N8103-
116A), create a VD dedicated to OS installation.
4.
WebBIOS cannot be handled via remote console functions of NEC ESMPRO Manager.
5.
The physical drive numbers shown in WebBIOS and those shown in Universal RAID
Utility are identified as follows.
– WebBIOS
Slot number shown in Physical View *
*1: The slot number, type of Hard Disk Drive, its capacity, and its current status are
shown in Physical View.
The slot number is indicated by the number 0 to 7. It represents the slot number in
the Hard Disk Drive bay.
– Universal RAID Utility
ID shown in Physical Device Properties
The slot number shown on WebBIOS corresponds to the physical device ID shown
on Universal RAID Utility. For more information, refer to the Universal RAID
Utility User's Guide.
Physical View of WebBIOS