NEC Express5800/T120a-E N8100-1531F User Manual Download Page 477

Page: 477 / 542

Installing Windows Server 2008 D-41

At the command prompt, type

slmgr –atp <CID>

, and press

Enter

* CID is the confirmation ID that you received from the call center.

The Windows activation is complete.

The procedure to set PAE option

If your 32-bit system has a memory capacity in excess of 4GB, setting PAE option will enable the
system to be installed with over 4GB of memory.

IMPORTANT:

"PAE option" is not supported on Windows Server 2008

Standard.

In Windows Server 2008 system, the PAE option can be set by using Bcdedit.exe.

The setting procedure is as follows.

Click [Run] on [Start] menu.

Type "cmd.exe" in the [Open:] box to start command prompt.

Execute following command line.

bcdedit /set pae forceenable

Restart the system.

The setting mentioned above enables after reboot.

Execute following command line on command prompt.

bcdedit

Confirm "pae ForceEnable" exists in "Windows boot loader".

The setting for PAE option is now completed.

Refer following site about Bcdedit.exe.

"Boot Configuration Data Editor Frequently Asked Questions"

http://technet.microsoft.com/en-us/library/cc721886(WS.10).aspx

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Express5800/T120a-E N8100-1531F

Reviews:

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 477 / 542

Search results

Summary of Contents for Express5800/T120a-E N8100-1531F

Reviews: