manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 128 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 128

4-58  Configuring Your Server

WebBIOS Menu

Controller Selection

Goes back to Adapter Selection menu.

Controller Properties

Displays properties of the controller.

Scan Devices

Detects Hard Disk Drives connected with the controller again.

Virtual Drives

Opens operation window for VD that has already been configured.

Drives

Opens operation window for Hard Disk Drive connected with the
controller.

Configuration Wizard

Displays the wizard to configure VD.

Physical View /
Logical View

Switches indication between Hard Disk Drives and VD
configuration.

Events

Displays event data.

Exit:

Goes to Exit menu of WebBIOS.

Status Indication of Virtual Drive (not shown on Physical View)

Optimal

Indicates that the VD is in normal state.
The indication is green.

Partially Degraded

Indicates that one of the Hard Disk Drives in the relevant VD is
degraded in RAID6 configuration.
The indication is blue.

Degraded

Indicates that one or two of the Hard Disk Drives in the relevant VD
is degraded in RAID6 configuration.
The indication is blue.

Offline

The relevant VD is in offline state.
The indication is red.

Initialization

The relevant VD is being initialized.

ConsistencyCheck:

Consistency Check is being performed to the relevant VD.

Rebuild

The relevant VD is being rebuilt.

BackGroundInitialize

The relevant VD is being initialized in background.

Reconstruction

The relevant VD is being reconstructed.

Status Indication of Hard Disk Drive

Unconfigured Good

The Hard Disk Drive connected with the controller is not in use.
The indication is blue.

Online

Indicates that the Hard Disk Drive in configuration is in normal
state.
The indication is green.

Offline

Indicates that the Hard Disk Drive in configuration is in offline state.
The indication is red.

Unconfigured Bad

The relevant Hard Disk Drive is faulty.
(The Hard Disk Drive in this status can be checked only on
Physical View.)
The indication is black.

Rebuild

The relevant Hard Disk Drive is being rebuilt.
The indication is yellow.

Hotspare

Indicates the Hard Disk Drive that is assigned to hot-spare.
The indication is pink.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments