NEC Express5800/T120a-E N8100-1531F User Manual Download Page 208

Page: 208 / 542

5-30 Installing the Operating System with Express Setup

Installing RAID Controller Driver (N8103-115)

The installation procedure depends on your environment.

Follow steps below appropriate to your environment.

If the Internal RAID Controller (equivalent to N8103-116A) or
N8103-116A/117A/118A is used:

You do not need to install the driver manually. It is automatically installed by Windows Plug-and-
Play.

If the Internal RAID Controller (equivalent to N8103-116A) or
N8103-116A/117A/118A is not used:

Install the driver by the following procedures.

Start [Device Manager] from [Start] menu

→

[Administrative Tools]

→

[Computer

Management].

Double-click the "LSI Logic MegaRAID SAS 8880EM2 RAID Controller" which Device
Manager lists as "Storage controllers".

Click [Update Driver].

When the "Update Driver Software- Logic MegaRAID SAS 8880EM2 RAID Controller
Wizard" appears, select "Browse my computer for driver software".

Select "Let me pick from a list of device drivers on my computer".

Click [Have Disk..].

Insert "NEC EXPRESSBUILDER DVD" into the optical disk drive.

Enter a path to the folder in the NEC EXPRESSBUILDER DVD into "Copy
manufacturer's files from:" and click [OK].

–

Windows Server 2008 64-bit (x64) Edition:

<drive letter>:\010\win\winnt\oemfd\ws2008x64\fd1\megasas

–

Windows Server 2008 32-bit (x86) Edition:

<drive letter>: \010\win\winnt\oemfd\ws2008\fd1\megasas

Specify the following driver and click [Next].

–

[LSI Logic MegaRAID SAS 8880EM2 RAID Controller]

Click [Close].

The installation of the driver is completed. Restart the system.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Express5800/T120a-E N8100-1531F

Reviews:

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 208 / 542

Search results

Summary of Contents for Express5800/T120a-E N8100-1531F

Reviews: