manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 505 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 505

Installing Windows Server 2003 x64 Editions    E-27

Installing RAID Controller Driver (N8103-115)

The installation procedure depends on your environment.

Follow steps below appropriate to your environment.

z

 If the Internal RAID Controller (equivalent to N8103-116A) or N8103-116A/117A/118A

is used:

You do not need to install the driver manually. It is automatically installed by Windows Plug-and-
Play.

z

 If the Internal RAID Controller (equivalent to N8103-116A) or N8103-116A/117A/118A

is not used:

Install the driver by the following procedures.

 

1. 

Start [Device Manager] from [Start] menu 

→

 [Control Panel] 

→

 [Administrative Tools]

→

 [Computer Management].

 

2. 

Double-click the RAID Controller which Device Manager lists as Other device.

 

3. 

Click [Update Driver].

 

4. 

When the "Update Device Driver Wizard" appears, select "No, not this time" and click
[Next].

 

5. 

Select "Install from a list or specific location [Advanced]" and click [Next].

 

6. 

Select "Don't search. I will choose the driver to install" and click [Next].

 

7. 

Select "SCSI and RAID controller" and click [Next].

 

8. 

Click [Have Disk..].

 

9. 

Insert "NEC EXPRESSBUILDER DVD" into the optical disk drive, enter "<drive
letter>:\010\win\winnt\oemfd\w2k3amd\fd1" into "Copy manufacturer's file from:" and
click [OK].

 

10. 

Specify the following driver and click [Next].

–

 

[LSI Logic MegaRAID SAS 8880EM2 RAID Controller]

The installation of the driver is completed. Restart the system.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments