NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 312 / 542

8-22 Troubleshooting
Error Messages on Virtual LCD
NEC EXPRESSSCOPE Engine 2 (Remote Management Controller) on your server board allows
you to monitor the server status on the Web browser.
POWER ON
ATTENTION
Virtual LCD
Status indicators
Message send from BIOS
Message send from BMC
Example:
Messages displayed on upper line (BIOS message)
On-screen message Description Action
XX BIOS Rev XXXX POST in progress. Wait until POST completes.
Prepare To Boot POST completes normally. Wait until Boot completes.
Mem Reconfigured POST completes with memory degraded.
Mem Err Disable A correctable memory error frequently
occurred.
CPU Reconfigured POST completes with processor
degraded.
Memory C-Err XX A correctable error frequently occurred.
Memory U-Err XX An uncorrectable error has occurred.
PCI Bus SERR XX A SERR has occurred in the PCI bus XX.
PCI Bus PERR XX A PERR has occurred in the PCI bus XX.
Chipset Err XXXX A chipset error occurred.
Contact your service
representative.
Messages displayed on lower line (BMC message)
On-screen message Description Action
Proc 1 VccpAlm
Proc 2 VccpAlm
BB P_Vtt Alm XX
BB +1.5v Alm XX
BB +1.8v Alm XX
BB +1.9vs Alm XX
BB +3.3v Alm XX
BB +3.3vs Alm XX
BB +5.0v Alm XX
BB +5vs Alm XX
BB +12v Alm XX
VBAT Alm XX Voltage alarm occurred
XX=09: high voltage (alarm)
XX=02: low voltage (alarm)
XX=07: high voltage (warning)
XX=00: low voltage (warning) Contact your service
representative.