NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 285 / 542

Maintenance 7-9
7.
Follow the guide line shown at the bottom of the screen, and press the Esc key.
The [Enduser Menu] below is displayed.
Enduser Menu
Please choose a function by the arrow key and push Enter key.
<Test Result>
<Device List>
<Log Info>
<Option>
<Reboot>
TeDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)
Enduser Menu
<Test Result> Shows the diagnostics completion screen of the above diagnostics.
<Device List> Shows a list of connected devices.
<Log Info > Shows the log information of the diagnostics. Log information can be
saved.
To save it on a floppy disk, insert a formatted floppy disk to the floppy
disk drive, and select <Save(F)>.
If your server is not equipped with floppy disk drive, connect the USB
floppy disk drive.
<Option> Optional features can be used from this menu.
<Reboot> Reboots the system.
8.
Select <Reboot> in the [Enduser Menu] above.
The server restarts and the system is started from the NEC EXPRESSBUILDER.
9.
Exit the NEC EXPRESSBUILDER, and remove the DVD from the optical disk drive.
10.
Power off the server and unplug the power cord from the receptacle.
11.
Reconnect all the LAN cables that have been disconnected in Step 2 to the server.
12.
Plug in the power cord.
This completes the system diagnostics.