manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 289 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 289

Maintenance  7-13

 

1. 

Take a media out of the server, if any.

 

2. 

Power off the server (the POWER/SLEEP lamp goes off).

 

3. 

Unplug the power cord of the server from a power outlet.

 

4. 

Remove all the cables from the server.

 

5. 

Hold the server by its bottom to carry the server.

IMPORTANT:

 Do not hold the front mask to lift the server. The front

mask may be disengaged from the server, causing personal injury.

 

6. 

Protect the server with the shock-absorbing materials, and pack it securely.

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments